BMW Motorrad Battery Charger Plus

Keep your battery alive throughout the year with the new BMW Motorrad Battery Charger Plus. The high-quality BMW Motorrad Battery Charger Plus allows for fully automatic, microprocessor-controlled charging and care of all original BMW Motorrad batteries including BMW Motorrad lithium ion 12 V batteries with a capacity of 6 to 60 Ah. The charger can also be used on non-brand specific conventional lead-acid batteries, maintenance-free rechargeable batteries (gel/AGM) as well as lithium iron phosphate (LiFePo4) batteries, depending on the specific needs of the battery technology used.  With the high-end, microprocessor-controlled unit, it enables the consumer to have a worry free, ease of use system, by connecting the battery charger clamps to either the battery terminal or simply plugging the DIN connector into the BMW accessory port and walking away. The smart technology will automatically detect battery sizing and select the proper charging rate for whatever battery is specifically installed on that vehicle. This system enables a prolonged life of the vehicles battery by preventing harmful total discharge during off-season use along with protection against a surge, short circuit and polarity reversal.

• Using the new BMW Motorrad battery charger Plus, original BMW Motorrad lithium ion starter batteries can now be optimally charged and maintained.
• The BMW Motorrad battery charger Plus charges all starter batteries from BMW Motorrad.
• High-end, microprocessor-controlled charging and trickle-charging device for 12 V motorcycle batteries
• Maximum charge current: 2.5 A
• Suitable for:
  • Lithium iron phosphate batteries (LiFePo4) with capacities between 6 and 60 Ah
  • Lead-acid batteries with open cells, lead-acid batteries with closed cells (maintenance-free cell batteries (gel or AGM))
  • For BMW motorcycles with or without CAN bus technology
• Charging via motorcycle socket or, as an alternative, using the enclosed adapter cable, directly at the battery terminals of the motorcycle battery
  • Fully automated, in accordance with the charging characteristics stored in the microprocessor
  • The device may stay connected to the vehicle or the battery for a long period. Charging takes place in cycles; the battery is monitored and recharged if necessary.
• Text output in the display: information on charging state of the battery and activities in the battery charger
  • Selection of 6 display languages: German, English, French, Spanish, Italian, Portuguese
  • Setting by membrane keyboard possible
• Protection against short circuit, polarity reversal and overload
• Charge current reduction at low temperatures
• Dimensionally stable plastic housing
• Delivery including adapter cable for direct connection to battery and holding loop for attachment to the handlebars, for example.
• 110 V / 60 Hz, power cable with connector type A
  • Charging voltage: 12 V
  • Maximum charge current: 2.5 A
  • End-of charge voltage: 14.4 V
  • Dimensions (L×W×H): 135×120×50 mm
  • Weight: approx. 800 g